Environment Protection Lollipop Candy Paper Stick Making Machine

The paper stick machine is also called the straight winding machine. The working method is to cut the whole roll of paper according to the length, and then roll it up from the beginning until the whole paper section is finished. In the rolling, the two ends of the paper stick are always flush. , So it is called a straight roll machine.

paper feeding mechanism

The paper roll fixing mode is divided into two types:

built-in type and outer frame type according to the diameter of the paper roll.

Magnetic powder tension controller is a device to ensure that the paper has enough tension to ensure that the paper stick forming belt.


Paper cutting machanism

the paper cutting roller will automatically cut the formed paper stick according to the set length.

Note: The thickness of the paper determines the diameter of the paper stick, so you must tell the thickness of the paper before ordering.

The thickness of the regular paper: thin axis paper stick: φ1.4-2.0mm, 30-50 grams of paper is used (gram weight per square meter)

Thick-axis paper stick: φ2.0-3.0mm, use 50-70 grams of paper (gram weight per square meter)

Paper stick forming mechanism

The rubber presses the cut shaped paper stick tightly on the shaping template and twist the paper stick into a predetermined diameter, the formed paper stick is sent out through the receiving conveyor belt

Gluing mechanism

the glue coating wheel completes the glue application, and the amount of glue is adjusted and controlled by the glue motor.

Note: glue and making

Generally, polyvinyl alcohol powder is added to water to melt and can be adjusted into paper stick machine glue.

Making method: add one part of polyvinyl alcohol powder to two parts of water, stir evenly, heat to melt into syrup, then when using, you can take one part of the melted glue and add ten parts of water and mix it evenly, because polyvinyl alcohol is a kind of sugar,so the paper stick made belongs to the environmental protection paper stick,  which can be used as lollipops and other foods.

The end cutting is completed by the matching machine, and the cutting knife is installed on the knife holder according to the required size of each manufacturer and then driven by the rubber wheel,rotate the paper stick and cut off both ends smoothly.

Conveyor belt feeding mechanism

the paper sticks have been cut the end fall on the conveyor belt installed at the lower part, and are sent out to the box-shaped platform smoothly, waiting to be collected.

Alisa whatsapp:86-136 2587 3008

         email:sales@sonypack.com

         www.sonypack.com